Firewood processing equipment, log saw splitter SSA 500GH-PRO/S with gasoline engine drive, suitable for preparing fuel from logs with a diameter of up to 500 mm.
Lumag SSA 500*H-PRO/S series firewood processing equipment can be equipped with a hydraulic log lifting mechanism, as well as an automated log feeding mechanism.
The log saw splitter can be used with a 4x or 6x splitting wedge.
SSA series log saw splitters come standard with a conveyor belt for transporting split wood quickly, ready for transport in cargo boxes, wood drying crates, or wood piles.
Lumag SSA 500GH-PRO/S log saw splitter is suitable for processing large logs up to 500 mm in diameter into 200 – 550 mm blocks, which are then split into 4 or 6 pieces with a force of 20 tons in the next step.
The log saw splitter is equipped with a hydraulic log holder that ensures the log’s fixation during sawing, and as standard equipment, it comes with a chain-type log feeding conveyor, which ensures a much more efficient log feed.
Lumag SSA 500 GH-PRO/S Technical Specifications:
Drive: Gasoline engine
Splitting force: 20 t
Productivity: 8 m³ – depending on the hardness of the wood
Engine: Loncin G420FD
Engine power: nominal 9.2 kW – maximum 11.7 kW at 4500 rpm
Engine displacement: 420cm³
Fuel type: gasoline
Fuel tank capacity: 6.5 liters
Fuel consumption: 4.3 liters per hour at 100% engine load
Hydraulic oil volume: 44 liters
Saw hydraulic motor: 4500 rpm
Conveyor hydraulic motor: 284 rpm at 110 bars, 285 Nm
Chain saw drive: hydraulic
Chain saw control: hydraulic
Chain saw bar length: 55 cm
Chain: (STIHL) C3621 000 0077/0.375/1.5 mm
Log diameter: 10 – 50 cm
Log holder: hydraulic
Block length: 20 – 55 cm
Block length marker: Available
Splitting wedge: 4-part
Splitting counter-wedge: available
Splitting wedge height adjustment: 9 positions
Hydraulic oil temperature indicator: available
Hydraulic cylinder speed: pressing – 5 cm/sec
Hydraulic cylinder speed: returning – 3 cm/sec
Outgoing conveyor belt speed: 0.5 m/sec
Equipment dimensions: (WxDxH) 2200 x 1050 x 1250 mm – unassembled
Outgoing conveyor belt dimensions: (WxDxH) 3200 x 250 x 2200 mm – assembled
Equipment weight: 825 kg
Lumag SSA 500GH-PRO/S Standard Equipment:
Log saw splitter SSA 500GH-PRO/S
Chain-type log feeding conveyor
Outgoing conveyor
4-part splitting wedge
In addition to firewood production equipment, it is possible to equip with a hydraulic log lifting mechanism, significantly facilitating the placement of logs on the log feeding conveyor, as well as with a hydraulic log feeding table. Choosing to equip the equipment with any of these additional accessories significantly increases the volume of produced firewood.
Skatiet arī citu malkas sagatavošanas tehniku, malkas zāģus skaldītājus kategorijā!